How to correctly select and use cold pressed kraft tape to meet different industrial needs?

1. Correctly choose cold-pressed cowhide tape
Get a deeper understanding of industrial needs:
Before choosing cold-pressed cowhide tape, you must have an in-depth understanding of the specific industrial scenarios it is used in, such as the specific requirements for tape performance of different types of capacitors such as metallized capacitors and safety capacitors. Considering the extreme working environment that capacitors may face, such as high temperature, high pressure or chemical corrosion, these factors will directly affect the material selection of the tape. Understanding the specific operating steps in the process, such as the high temperatures and solvents that the tape needs to withstand during the masking process, will help to choose a more suitable tape model.
Comprehensive consideration of tape characteristics:
Kraft paper substrate is known for its unique strength and toughness, making it suitable for applications that require a certain amount of support and tensile strength. However, although natural latex primer is environmentally friendly, its adhesion performance may be affected by ambient temperature, humidity and surface properties of the adherend. When selecting, it is necessary to comprehensively consider the synergistic effect of the base material and primer, as well as the tape's temperature resistance, chemical solvent resistance, insulation performance, etc., to ensure that the selected tape can fully meet industrial needs.
Check out the product specification sheet for details:
The product specification table is an important reference for selecting cold-pressed cowhide tape. By comparing tapes of different brands and models, you can learn more about their key performance indicators such as tensile strength, elongation, and temperature range. These indicators are directly related to the stability and reliability of the tape in practical applications. During the selection process, be sure to carefully review and compare product specification sheets to ensure the tape you choose meets or exceeds industry requirements.

2. Correct use of cold-pressed cowhide tape
Be fully prepared:
Before using cold-pressed cowhide tape, you must ensure that the surface of the adherend is clean, dry, and free of oil and impurities. These contaminants may reduce the adhesion of the tape, causing it to peel off or fail during use. Therefore, the surface of the adherend should be thoroughly cleaned before pasting. At the same time, cut the tape to the appropriate length according to actual needs to avoid waste and unnecessary trouble.
Standardize the paste operation:
When pasting cold-pressed cowhide tape, the operating procedures should be strictly followed. First, select the appropriate pasting direction and location based on the shape of the adherend and the location to be pasted. Then, apply the tape flatly to the adherend, making sure there are no bubbles or wrinkles. During the pasting process, force should be applied evenly to avoid excessive force that may cause damage to the tape or the surface of the adherend. At the same time, the stretch of the tape should be appropriately adjusted according to actual needs to ensure its adhesion effect and service life.
Complete the follow-up processing carefully:
After the pasting is completed, the tape should be carefully processed. Press lightly on the tape surface to eliminate possible air bubbles and enhance adhesion. Use special tools to cut or trim the tape to meet process requirements. You should also pay attention to check the sticking effect and usage of the tape. If the tape is found to be aging, falling off or declining in performance, it should be dealt with or replaced in time.
Strictly follow the precautions:
When using cold-pressed cowhide tape, relevant precautions should be strictly followed. Avoid exposing the tape to harsh environments such as heat, moisture or chemicals to avoid affecting its performance and service life. During use, you should pay attention to safe operating practices to avoid accidents. If any abnormality is found with the tape, stop using it immediately and seek professional help to ensure production safety and product quality.